If your adt doorbell camera is blinking red while charging, there is a good chance that the battery power level has reached low levels. That’s why you need to take the time to recharge it as soon as possible.
This can be done by connecting a Micro USB cord to the recharging port on the back of the ADT doorbell. Plugging that into a wall outlet will provide power to the unit while also charging up the battery to 100 percent.
Battery
When the battery in your ADT doorbell camera blinks red, it indicates that the battery is low. The battery powers the ADT camera and allows it to communicate with your smartphone.
Batteries are electrochemical devices, consisting of two metal electrodes (the anode and cathode) and an electrolyte solution. The battery operates through chemical reactions known as oxidation and reduction.
To recharge your ADT doorbell camera’s battery, remove the faceplate of your camera and locate the recharging port. Next, attach a mini USB cable to the recharging port and plug it into a source of power.
After the ADT doorbell camera battery is completely charged, the red light will stop flashing. You can continue using the camera for several months after it has been recharged.
Internet Connection
If your ADT doorbell camera is blinking red while charging, it means there is a problem with the internet connection. This can be a result of a weak Wi-Fi network or a router that is too far away from your ADT doorbell camera.
The internet is a network of connected computers and other devices that send and receive data across the globe. Data is transferred using the Transport Control Protocol (TCP), which breaks it up into packets and routes them to other devices such as routers, switches, and other networks.
Once they arrive at their destination, these packets are reassembled in order and the device that received them can use the data for a specific purpose.
Unstable internet connectivity is a common issue that can be fixed easily. It is typically a result of a Wi-Fi router that is too far from your ADT doorbell camera, and it can be resolved by moving the router closer to your ADT doorbell.
Wi-Fi Connection
A blinking red light on your ADT doorbell camera may indicate that the battery is low or the hardware will soon fail. These are serious problems, and they must be addressed as quickly as possible.
One of the easiest ways to solve this problem is by recharging the battery. Simply remove the faceplate, and find a recharging port. Plug a mini USB cable into this port and the other end into a source.
This should take about an hour for a fully charged battery. Once this has been completed, the light will return to green.
In addition to the battery, your ADT doorbell needs a stable Wi-Fi connection in order to function properly. This can be caused by a variety of reasons, including a router that has been disconnected from the internet or an unstable signal.
Both of these issues can be easily resolved by reestablishing a stable Wi-Fi connection. So, it’s worth a try!
Hardwiring
If you have a hardwired adt doorbell camera, then it is connected to your home’s power supply by internal wires. This means it is primarily running on the battery and getting a trickle charge from your home’s power supply.
If the battery runs out, your adt doorbell will blink red. This is because the adt doorbell camera requires a trickle charge from your home’s main power supply in order to keep working.
You can solve this issue by installing a hardwired system in your house. This will eliminate the need for you to recharge the battery of your adt doorbell camera in the future.
If you decide to install a hardwired system, it is recommended that you hire an experienced electrician to do the work for you. This way, you will not have to worry about trying to hardwire your adt doorbell camera yourself if you do not have the right skills or knowledge.