If you have a geeni camera blinking red, it is likely that there is something wrong with the device. This problem is usually caused by hardware malfunctions such as cracks or impact damage.
Fortunately, it is possible to fix the issue by power cycling the camera. This will reset it to factory defaults, and it should fix the problem.
Problem
Occasionally, your Geeni camera may blink red. This can point towards a variety of things, from software bugs to hardware problems.

In such cases, it’s important to try a few troubleshooting steps before settling on one solution. You can try power cycling the device, factory resetting it, or contacting customer support for assistance.
Rebooting a device helps clear out software bugs or conflicting files that could be causing the issue. So, before you go any further, perform a power cycle on your network devices and the Geeni camera.
If that doesn’t fix the problem, you may need to contact a technician for repair. Alternatively, you can claim the warranty and get a new device.
Solution
If your Geeni camera blinking red is due to a hardware issue, you can reset the device. This will revert it to its factory settings and eliminate any programming-related bugs that may have caused the problem.
To do this, press and hold the reset button for at least five seconds. You should hear a voice notification from the camera when it has reset.
Depending on the model of your Geeni camera, this will also reset any changes you have made to the settings. However, you should be aware that this might not work every time. If it does not reset, disconnect the power for at least five minutes and try again.
Recommendation
Geeni cameras are a great option for those looking to protect their home. They come with a wide field of view, 115-degree night vision, a mic and speaker for two-way audio, and motion-detection sensors.
One of the most common problems that people experience is that their camera blinks red, which can be a sign that there’s something wrong with the device. This can be due to a variety of issues including hardware malfunctions, minor programming bugs, and more.
In some cases, this problem can be fixed by factory resetting the device. This will reset all of the settings in the device and get it working again.
It might take a little time to fix, but it is a good solution for most of these issues. If the problem still persists, try contacting customer support and see if they can help you out. They will be able to narrow down the issue for you and fix it quickly!
Feedback
If your Geeni camera is flashing red, it means that something is wrong with the device. However, it can usually be fixed without too much trouble.
If you suspect a problem with the power supply, disconnect the camera for five minutes and then try again. If the red light stays on after a power cycle, this indicates a hardware issue and you should contact Geeni directly.
You can also reset the device to factory settings if you think this might help solve the issue. This should get your camera back to its original default settings and will probably fix any other issues that might be causing the flashing red light.
The Geeni Vision is a basic smart home security camera that offers a 115-degree field of view, 720p video recording and night vision, a mic and speaker for two-way audio and motion-detection alerts. It streams video to your Wi-Fi network and can be controlled with the companion Geeni app or Alexa and Google Assistant.