If your owlet camera blinks blue and red, you may be having trouble connecting to your Wi-Fi network. Fortunately, there are several troubleshooting steps that can help you resolve the problem.
First, check to see if your cam’s firmware needs an update. If so, follow the instructions in the app to complete the process.
Power Issues
The Owlet camera is a baby monitoring tool that helps parents keep tabs on their children. It can be helpful for monitoring heart rate, oxygen levels, and other vital signs.
Occasionally, there are power issues that can cause your owlet camera to blink blue and red. These can be caused by a number of problems, including power cuts or a faulty power adapter.
You can easily identify which power issue you are experiencing by keeping track of the status light that is below your owlet cam lens. The status light will flash blue and red when your cam is in pairing mode.
To pair your owlet cam, you must first ensure that the mobile device and your owlet cam app are connected to the same WiFi network. After that, you must place your owlet cam near your device so that the QR code can be read by the app.
If your owlet cam is still not pairing after following the instructions above, then you may have to conduct a ‘hard reset’ on the unit. You can do this by pressing and holding the reset button for 15 seconds.
Network Issues
If you’re having issues with your owlet camera blinking blue and red, it may be because of network issues. These could include a router reboot, power interruption, phone restart, ISP update, or other issue that affects the connection between your owlet camera and your home network.
Reinstalling the Owlet app on your device can help resolve this issue. Once the reinstalling process is complete, you should be able to connect your camera to your network again.
This can be a quick fix that can address minor programming issues that might be causing the problem. This can also help you narrow down the root cause of your connection issues, which can save you a lot of troubleshooting time.
If you’re still having connectivity issues with your owlet camera, you should consider performing a factory reset on the unit. This will solve any software problems your owlet camera may have, along with any internet connection issues you’re currently experiencing.
Application Issues
If your owlet camera blinking blue and red is caused by an application issue, you may need to force close the app and log in again. This will usually address the problem and make the camera work properly again.
Owlet is a wireless baby monitoring system that connects to your Wi-Fi network and sends notifications when it detects a drop in heart rate, oxygen levels or other vital signs. The Owlet app allows you to monitor your baby’s health from anywhere, using a smartphone or tablet.
In order to ensure you don’t have to worry about your baby running away, the Owlet app will alert you whenever your baby moves. You can set the sensitivity to high or low, depending on how often you want to receive notifications.
If you’re having trouble pairing your camera to the Owlet app, check that it is close enough to the router in order to be successfully paired. If it is too far, you can reposition it closer to the router and re-attempt the pairing process.
Reset
If the owlet camera is blinking blue and red, there may be issues with its reset. It could be that the app is not allowing the device to connect to your WiFi network, or you haven’t closed it properly after resetting.
To fix this, you’ll need to close the app and relaunch it. This will refresh the data that’s being stored on your device, and it’ll allow your device to connect with the Cam again.
During the setup process, your Owlet app creates a unique QR code that is used to pair the device with the camera. The QR code will time out after 90 seconds.